| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bridge Placement on Nylon Crossover. (math involved) http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40150 |
Page 1 of 1 |
| Author: | RaymundH [ Mon Apr 22, 2013 2:20 pm ] |
| Post subject: | Bridge Placement on Nylon Crossover. (math involved) |
Hi everyone, I recently finished the neck and box on a nylon crossover and I am struggling as to where to place the bridge. I based the construction on a 1 7/8" , 25.4 scale neck, 14 fret, Martin 000 body. The soundboard is latticed braced and the rest is pretty similar to the standard Martin body. I generally use a Stew-mac saddlematic, however, the classical bridge I am using has a straight saddle slot not a compensated one. Should I remove the pins totally and measure without them or is there a distance they should be set at for nylon strings?? Any idea's would be great! Thanks |
|
| Author: | meddlingfool [ Mon Apr 22, 2013 2:46 pm ] |
| Post subject: | Re: Bridge Placement on Nylon Crossover. (math involved) |
I believe the stew Mac fret calculator will be your friend here. If I'm not mistaken, it will give you actual string length for nylon strings... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|