Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Whats going on in your shop? weekend of the 20th
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40126		 Page 1 of 3
Author:  micahmed [ Sat Apr 20, 2013 11:11 am ]
Post subject:  Whats going on in your shop? weekend of the 20th
Well, I'm pore filling a couple guitars. may glue up a top and back and maybe bend a set of purple heart. oh, may glue a rosette up too.
Author:  PeterF [ Sat Apr 20, 2013 11:50 am ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Fitting the end graft and hand-cutting the binding channels for my newbie challenge quinto guitar. I really need a router gaah
Image

Image
Author:  micahmed [ Sat Apr 20, 2013 12:29 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
they are nice! I have six lol
Author:  Casey Cochran [ Sat Apr 20, 2013 8:54 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Put the pickguard on and strung up #2! bliss
Author:  Pmaj7 [ Sat Apr 20, 2013 8:57 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Toooo many fixes!!!
Author:  Beth Mayer [ Sat Apr 20, 2013 10:45 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
PeterF wrote:
Fitting the end graft and hand-cutting the binding channels for my newbie challenge quinto guitar. I really need a router gaah
Image

Image


Peter, amazing look. Love the back inlay, the offset end graft and the general aesthetic! Hard to believe you're a newbie :)

I'm sharpening plane blades and ready to start a pair of slope shoulder dreads. Cleaned the shop.
Author:  B. Howard [ Sun Apr 21, 2013 5:26 am ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Waiting for lacquer on the last two to dry so I can buff and assemble, that will be another week at least. Lot's of repairs, Re-binding an old Gibson, partial re-finish of a 50's Gretsch and a couple of pick up installs. Meanwhile the next three are underway, got all my rims planed down and ready to bend.
Attachment:
IMG_4073.JPG
Author:  Clinchriver [ Sun Apr 21, 2013 6:13 am ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Closed the boxes on #2 a 13 fret Curly Maple, Gibson Nick Lucas and #3 a White Oak "pre war" 1937 spec Herringbone Dread.
Author:  Herr Dalbergia [ Sun Apr 21, 2013 6:14 am ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
why is my cat in your workshop?????P
Author:  George L [ Sun Apr 21, 2013 4:01 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Nope, I think that's my cat. laughing6-hehe

Cool work going on. I love what you're doing, Peter. It's bold and different and looks great.

Clinch - Sweet work! White oak and maple are two woods I hope to try soon.

No guitar fun for me this weekend. I'm stuck with tons of yard work (literally) and painting our guest bedroom. I guess the painting is kind of guitar-related, as once that room is cleaned up I get to turn it into an indoor workspace just for me! bliss
Author:  James Orr [ Sun Apr 21, 2013 5:01 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Studying for finals and anxiously awaiting my latest eBay score, a bronze body Lie-Nielsen #4.
Author:  mqbernardo [ Sun Apr 21, 2013 5:13 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
finished my new circle cutter. i know i should be doing work for the newbie challenge, but i needed a relaxing fix. and i need a smaller screw...

peter, nice job on that quinto.
Author:  Fred Tellier [ Sun Apr 21, 2013 5:26 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Just glued the bridge on the Ziricote/sinker red ceder 12 fret 00 shown in this thread http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=38584 I will install the neck and tuning machines tomorrow and should be picking a tune on it by Wednesday if all goes well. It sister build the Ziricote OM is a few days behind but should be strung by next weekend.

Fred
Author:  Robbie_McD [ Sun Apr 21, 2013 6:22 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
James - that is one sweet plane!
Peter - that inlay on the back is sweet!
And that is definitely not my cat....
Making headway on a figured mahogany build:

Image
Author:  mkellyvrod [ Sun Apr 21, 2013 6:24 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Got the backs on #3 (sycamore), #4 (curly Spanish cedar) and #5 (African mahogany). Hope to start binding this week.
Author:  Robbie_McD [ Sun Apr 21, 2013 6:37 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Martin - is that sycamore on the left? It is gorgeous! Looks like lacewood...
Author:  mkellyvrod [ Sun Apr 21, 2013 6:47 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Rob,
sorry, should have been more clear. That is the sycamore on the left, with the curly Spanish cedar in middle. The sycamore sides look really nice as well, IMO; I've seen a couple of realy nice guitars on this site made with sycamore and can't wait to see how it finishes out. Got all the back and side sets from the Zootman.
Marty
Author:  ZekeM [ Mon Apr 22, 2013 6:48 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Awesome knobs filippo!! How'd you knurl the wood?? What's that body made of? It looks amazing! I want one!!!
Author:  Beth Mayer [ Mon Apr 22, 2013 7:26 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Amazing everyone! Fred...love that! You are almost there :)
I sprayed 6 coats of Nitro on an OM today, when our wind finally stopped. I'm in the kitchen rather than the shop this week, sharpening all the planes and chisels in anticipation of starting the next 2.
Filippo, those knobs are wicked cool :)
Author:  ZekeM [ Mon Apr 22, 2013 8:10 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Cool. I'm sure I could figure something out as long as you wouldn't mind me possibly swiping that idea on a future build?
Author:  Robbie_McD [ Mon Apr 22, 2013 8:58 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Filippo - that body is simply breathtaking!
Author:  James Ringelspaugh [ Mon Apr 22, 2013 9:30 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Simple bridge replacement... but there's a K&K pickup superglued to the bridge plate under the saddle so I can't use normal clamps. Yay vacuum!

Attachment:
rep_RK_br_1.jpg

Attachment:
rep_RK_br_3.jpg

Attachment:
rep_RK_br_2.jpg
Author:  J.L.K. Vesa [ Mon Apr 22, 2013 11:25 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
I am not Filippo,
but the body seems to be a Flaxwood body,
made out of their propriety composite,
which is polymers and natural fiber,
or spruce and plastic if you will.
Author:  Chuck [ Mon Apr 22, 2013 11:51 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
I build a caliper so I can measure the thickness on the back, sides and top. Took a trip to Harbor Freight and bought a digital dial caliper and then build a frame for it to fit in. Finished it off with a large melamine top for the wood to sit one. Seems to work just fine so far. I ended up with about twenty dollars in it including the digital caliper bolts, nuts and screws. I had the scrap wood from other projects.

Now I can measure the top, sides and back for my first build.

Chuck
Author:  Tai Fu [ Tue Apr 23, 2013 12:41 pm ]
Post subject:  Re: Whats going on in your shop? weekend of the 20th
Been building a workbench/top out of beech tongue and groove floorboards I picked up from a house renovations 2 years ago...

Image

Image

As for dial indicators... all the ones I can find in Taiwan are metric... so is there anyone who is willing to buy a few for me from harbor freight?

I'm so used to inches it's hard for me to think in millimeters...
Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/