| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Dovetail Cutter Angle http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=39617 |
Page 1 of 1 |
| Author: | dradlin [ Wed Mar 06, 2013 10:21 am ] |
| Post subject: | Dovetail Cutter Angle |
LMI sells a 7 degree dovetail cutter and Stewmac 10 degree. What angle is your preference and why? |
|
| Author: | Fred Tellier [ Wed Mar 06, 2013 12:22 pm ] |
| Post subject: | Re: Dovetail Cutter Angle |
Martin uses 10 degree. I have the StewMac cutter and it works great. I thought you were doing a bolt on Dave. Fred |
|
| Author: | martintaylor [ Wed Mar 06, 2013 5:10 pm ] |
| Post subject: | Re: Dovetail Cutter Angle |
I also use the StewMac cutter and templates. I usually still have to do some hand refining of the neck to get it sitting just right. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|