Official Luthiers Forum!
http://www.luthiersforum.com/forum/

lmi bending iron
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=39585		 Page 1 of 1
Author:  sfgfan09 [ Sun Mar 03, 2013 10:46 pm ]
Post subject:  lmi bending iron
i have completed two guitars so far, both from kits with some of the work done. I want to build my third from scratch and was looking at lmi's bending iron. I really don't trust myself to wire an electronic one and don't want an open flame in the garage. Is this a good bending iron?
Author:  nickinbruns [ Sun Mar 03, 2013 11:00 pm ]
Post subject:  Re: lmi bending iron
Check out an eBay seller taisamlu

Has a couple variants for less than $100(much less)

I've gotten plenty of stuff off him and it's all good quality....
Author:  sfgfan09 [ Sun Mar 03, 2013 11:19 pm ]
Post subject:  Re: lmi bending iron
thanks for the suggestion but i couldnt find any bending irons from that seller. does he really have some in stock?
Author:  Tai Fu [ Sun Mar 03, 2013 11:54 pm ]
Post subject:  Re: lmi bending iron
Me neither, I thought he only had inlay materials and bone blanks, which is kinda hard to mess up on...
Author:  nickinbruns [ Mon Mar 04, 2013 12:08 am ]
Post subject:  Re: lmi bending iron
Sorry boys, I meant to say luthierwood-shop :oops:

I get other stuff from Sam, including tuners and inlay stuff. Luthierwood-shop has quite a few tools as well.
Author:  sfgfan09 [ Mon Mar 04, 2013 12:49 am ]
Post subject:  Re: lmi bending iron
I typed luthierwood-shop into ebay but could not find any results
Author:  nyazzip [ Mon Mar 04, 2013 1:37 am ]
Post subject:  Re: lmi bending iron
i think this must be it

http://www.ebay.com/sch/luthierwood-sho ... ksid=p3686
Author:  sfgfan09 [ Mon Mar 04, 2013 1:42 am ]
Post subject:  Re: lmi bending iron
Thanks! I'll have to check that out
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/