| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Carbon Fibre http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=39572 |
Page 1 of 1 |
| Author: | Hastings Guitars [ Sun Mar 03, 2013 6:07 am ] |
| Post subject: | Carbon Fibre |
Let's talk about carbon fibre. I have seen builders use it to reinforce the neck. What else do people use it for when building guitars and why? Any methods, general tips, advice on purchasing etc. Ed |
|
| Author: | Clay S. [ Sun Mar 03, 2013 8:19 am ] |
| Post subject: | Re: Carbon Fibre |
I've used carbon fibre cloth interleaved between the wood laminations on laminated sides and backs. Gives them that tupperware tap tone.  . It does give an added toughness to the sides, like a continuous side tape, and the sides and back can be made lighter and thinner if so desired.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|