| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| sanding orange peel out? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=39305 |
Page 1 of 1 |
| Author: | sprouseod [ Sun Feb 10, 2013 8:20 pm ] |
| Post subject: | sanding orange peel out? |
Finishing is definitely not my forte. I'm trying the new PolyWhey and have 2 coats down but some orange peel. Do I try to level this out before applying the next coat or just keep going? Thanks Richard |
|
| Author: | Joe Beaver [ Mon Feb 11, 2013 1:48 am ] |
| Post subject: | Re: sanding orange peel out? |
Never used polywhey but with KTM 9 I just keep going. The next morning I would level sand and spray some more until I have at least a dozen coats. After another three days or so I level sand again. If no sand through I let it cure a few weeks, do the wet sand thing to about 6000 grit then buff. Beautiful |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|