| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Another bender question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=39165 |
Page 1 of 1 |
| Author: | Chris Ensor [ Thu Jan 31, 2013 3:36 pm ] |
| Post subject: | Another bender question |
I plan on making my bending form solid (because I want to). With that in mind, do I need a piece of metal under the wood still? |
|
| Author: | Chris Ensor [ Thu Jan 31, 2013 7:16 pm ] |
| Post subject: | Re: Another bender question |
Thanks Todd. That was what I was hoping to hear. |
|
| Author: | Brad Way [ Fri Feb 01, 2013 5:29 pm ] |
| Post subject: | Re: Another bender question |
I have been using solid forms made from MDF. I have the blanket between the wood and the form and have had no problems. |
|
| Author: | WaddyThomson [ Fri Feb 01, 2013 7:15 pm ] |
| Post subject: | Re: Another bender question |
I have only done it once, but I used a solid form with a slat under the wood and the blanket on top of the wood, Kraft paper, tin foil sandwich, then a slat on top of the blanket. Worked fine for me. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|