Official Luthiers Forum!
http://www.luthiersforum.com/forum/

anyone up for a cleveland, ohio meet?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=38867		 Page 1 of 3
Author:  micahmed [ Thu Jan 10, 2013 12:31 pm ]
Post subject:  anyone up for a cleveland, ohio meet?
Brad Way and I have been talking about trying to get a get together going.
We were thinking of seeing if we could do the meet at the local woodcrafts store.
If people seem down for it, I'll go over and talk with the owner. he's real friendly guy
so I think he would be game for it.
Author:  Andy Birko [ Thu Jan 10, 2013 3:18 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
I might actually come over for something like that. Keep us posted.
Author:  micahmed [ Thu Jan 10, 2013 4:15 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Cool, I would like to have a hand full of guys willing to go before I talk to the people over and woodcraft.
Author:  klooker [ Thu Jan 10, 2013 6:04 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
I'd be into it.

Kevin Looker
Author:  Brad Way [ Thu Jan 10, 2013 6:35 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Count me in! [:Y:]
Author:  crich [ Thu Jan 10, 2013 9:52 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Count me in too! Clinton
Author:  micahmed [ Thu Jan 10, 2013 9:59 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Cool! I can think of 2 other guys who would be down for this too. I'll try and talking to the guys this weekend.
Author:  Tony_in_NYC [ Fri Jan 11, 2013 1:51 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
That's a 7 and a half hour drive for me. With kids and wife, closer to 12. If I can figure out how to ditch these free loaders, I might be able to make it!
Author:  micahmed [ Fri Jan 11, 2013 2:54 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
That would be awesome! I would let you crash at my place if you want. I know that drive, it's long. I'll be driving back and forth to NJ here in a couple weeks
Author:  Fred Tellier [ Fri Jan 11, 2013 3:06 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Depending on when it is I might be interested in coming, maybe Andy and I could carpool.

Fred
Author:  micahmed [ Fri Jan 11, 2013 3:27 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Awesome bliss I'll try and talk to the guy this weekend. I was going to see if he could put on a demo of some kind. Maybe a bandsaw set up are chisel sharpening. Would anyone want to put on some kind of demo? I'm only two deep, so the only demo I can do is how to glue your fingers together and how to screw up wood lol
Author:  Brad Way [ Fri Jan 11, 2013 5:47 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Micah....talked with another local, Matt Metro who said he is interested. Is Vince joining us?
Author:  Brad Way [ Fri Jan 11, 2013 5:49 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
micahmed wrote:
Awesome bliss I'll try and talk to the guy this weekend. I was going to see if he could put on a demo of some kind. Maybe a bandsaw set up are chisel sharpening. Would anyone want to put on some kind of demo? I'm only two deep, so the only demo I can do is how to glue your fingers together and how to screw up wood lol


Sounds like I should get my side bender finished for demo? LOL
Author:  Bryan Bear [ Fri Jan 11, 2013 6:00 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Tony_in_NYC wrote:
That's a 7 and a half hour drive for me. With kids and wife, closer to 12. If I can figure out how to ditch these free loaders, I might be able to make it!


It would be roughly a 9 hour drive for me. For some strange reason, I was considering going for it. If I didn't have a baby comming in the next few weeks it would just be crazy enough to be a go.
Author:  micahmed [ Fri Jan 11, 2013 8:43 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Brad Way wrote:
micahmed wrote:
Awesome bliss I'll try and talk to the guy this weekend. I was going to see if he could put on a demo of some kind. Maybe a bandsaw set up are chisel sharpening. Would anyone want to put on some kind of demo? I'm only two deep, so the only demo I can do is how to glue your fingers together and how to screw up wood lol


Sounds like I should get my side bender finished for demo? LOL



That or bring your CNC lol
Author:  Brad Way [ Fri Jan 11, 2013 10:51 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
micahmed wrote:
Brad Way wrote:
micahmed wrote:
Awesome bliss I'll try and talk to the guy this weekend. I was going to see if he could put on a demo of some kind. Maybe a bandsaw set up are chisel sharpening. Would anyone want to put on some kind of demo? I'm only two deep, so the only demo I can do is how to glue your fingers together and how to screw up wood lol


Sounds like I should get my side bender finished for demo? LOL



That or bring your CNC lol


Andy can bring his CNC! [:Y:]

On a side note, I wonder if there are any specific topics or points of interest others would interested in when they come?
Author:  micahmed [ Sat Jan 12, 2013 9:31 am ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Also, when is a good time for everyone?
Author:  crich [ Sat Jan 12, 2013 10:55 am ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
micahmed wrote:
Also, when is a good time for everyone?


My vote would be before May, that's when my outside activities start up again.

Clinton
Author:  micahmed [ Sun Jan 13, 2013 12:00 am ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
I would like to do it in the next month if that would work for everyone. I wasn't able to talk to the owner of woodcraft today. He was busy all day today and tomorrow teaching a class. Maybe sometime this week.
Author:  Andy Birko [ Sun Jan 13, 2013 9:11 am ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
As far as dates go, I vote against Feb 23&24 - I'll actually be in Cleveland but won't have any time to stop by.
Author:  joe white [ Sun Jan 13, 2013 9:35 am ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
I am in striking range of Cleveland. I would like to attend too.
Author:  Brad Way [ Sun Jan 13, 2013 1:25 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
joe white wrote:
I am in striking range of Cleveland. I would like to attend too.


It would be great to have you join us!
Author:  Brad Way [ Sun Jan 13, 2013 1:30 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Joe...if you are able to make it to the Cleveland gathering would you be willing to give a overview of finishing? We haven't established an agenda for the meeting yet but it would be great to give something for people to think about and you certain know finishing as well as anyone.

Let me know your thoughts.

Brad


joe white wrote:
I am in striking range of Cleveland. I would like to attend too.
Author:  joe white [ Sun Jan 13, 2013 5:12 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
It would be a privilege Brad.
Author:  micahmed [ Sun Jan 13, 2013 5:41 pm ]
Post subject:  Re: anyone up for a cleveland, ohio meet?
Andy, would you want to bring some of the things you cnc to show them off and maybe do a little sales pitch I mean talk about it? laughing6-hehe
Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/