| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Double 0 neck thickness http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=38782 |
Page 1 of 1 |
| Author: | WilbPorter [ Sat Jan 05, 2013 8:36 am ] |
| Post subject: | Double 0 neck thickness |
I am currently working on shaping a double 0 neck. Does anyone have any thickness dimensions ( including fretboard) for various positions along the neck? ( 1st, 6th, 10th fret) . Thanks. |
|
| Author: | jsmith [ Sat Jan 05, 2013 12:12 pm ] |
| Post subject: | Re: Double 0 neck thickness |
Are you looking to do an exact reproduction of a certain vintage 00? |
|
| Author: | WilbPorter [ Sat Jan 05, 2013 12:52 pm ] |
| Post subject: | Re: Double 0 neck thickness |
Just looking for some general guidelines. Thanks. Sent from my GT-P3113 using Tapatalk 2 |
|
| Author: | Fred Tellier [ Sat Jan 05, 2013 1:02 pm ] |
| Post subject: | Re: Double 0 neck thickness |
Here is some information that might help http://theunofficialmartinguitarforum.yuku.com/topic/73262#.UOhqI6zNmSo I actually used one of the images to creat a martin deep v vintage reproduction for a project last year. I maipulated the images to actual size and created templates from them. Fred |
|
| Author: | WilbPorter [ Sat Jan 05, 2013 1:31 pm ] |
| Post subject: | Re: Double 0 neck thickness |
Thanks for info guys. Sent from my GT-P3113 using Tapatalk 2 |
|
| Author: | DannyV [ Sat Jan 05, 2013 1:36 pm ] |
| Post subject: | Re: Double 0 neck thickness |
21 mm at the1st fret and 23 mm at the 9th or so works for me on most SS guitars. Would be different if you were going for a particular profile of course. Danny |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|