| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Hard Paper Laminate Material http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=38209 |
Page 1 of 1 |
| Author: | Stuart Gort [ Fri Nov 09, 2012 1:18 pm ] |
| Post subject: | Hard Paper Laminate Material |
I'm trying to locate some of that hard, pressed, colored paperboard material that is used to make thin layers in laminates but I can't remember the generic name by which it is called. If someone could say....or possibly recommend a good supplier of that material I would appreciate it. Thank you. |
|
| Author: | John Sonksen [ Fri Nov 09, 2012 1:50 pm ] |
| Post subject: | Re: Hard Paper Laminate Material |
Phenolic? |
|
| Author: | ballbanjos [ Fri Nov 09, 2012 1:52 pm ] |
| Post subject: | Re: Hard Paper Laminate Material |
Vulcanized fiberboard? |
|
| Author: | WaddyThomson [ Fri Nov 09, 2012 2:02 pm ] |
| Post subject: | Re: Hard Paper Laminate Material |
Fiber Veneer sheets. http://www.lmii.com/CartTwo/thirdproduc ... eer+Sheets |
|
| Author: | B. Howard [ Fri Nov 09, 2012 2:32 pm ] |
| Post subject: | Re: Hard Paper Laminate Material |
My Formica supplier simply calls it phenolic backer. |
|
| Author: | Peter J [ Fri Nov 09, 2012 3:07 pm ] |
| Post subject: | Re: Hard Paper Laminate Material |
Fishpaper; AKA: vulcanized fiber sheet. "Available in thinner gauges, typically from .0078" to .062" thick. Available in Grey (standard), Black, Blue, Brown, Red & White." http://www.professionalplastics.com/FISHPAPER |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|