| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Ziricote and CA http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37967 |
Page 1 of 1 |
| Author: | Piiman [ Wed Oct 10, 2012 10:57 pm ] |
| Post subject: | Ziricote and CA |
I'm building 2 guitars using Ziricote. It's by far the most crack prone wood I've used. I have the boxes together now and am wondering if flooding the Ziricote with CA would stabilize the wood, then follow that up with Zpoxy and regular finish schedule. |
|
| Author: | Ken Franklin [ Thu Oct 11, 2012 12:33 am ] |
| Post subject: | Re: Ziricote and CA |
Though CA adheres to epoxy, the epoxy doesn't adhere so well to the CA. If you are going to do that make sure you sand back to bare wood before pore filling. Better yet just use CA to pore fill. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|