| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Laminating Balsa veneer http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37776 |
Page 1 of 1 |
| Author: | ernie [ Wed Sep 19, 2012 7:02 pm ] |
| Post subject: | Laminating Balsa veneer |
Last week I laminated a double sided OM walnut with veneer, and really like the stiff sides. Today I laminated vertical grain e.maple to a piece of balsa veneer using white gorilla polyurethane glue. Has anyone out there used balsa for veneering sides? . I got the idea from the GAL article on laminating double bass sides using silk and maple. Gore/s book illustrates a spruce top with balsa/cf , am just wondering if others have done it , and what were the results? I/m guessing one could do the same for the back e.g. 2 part lamination of rosewood and balsa veneer..Also does anyone have a good source for balsa veneer sheets? Thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|