| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Need immediate source for 3A-4A Englemann Spruce http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37772 |
Page 1 of 1 |
| Author: | Paul Burner [ Wed Sep 19, 2012 7:31 am ] |
| Post subject: | Need immediate source for 3A-4A Englemann Spruce |
Guys, At the 11th hour I had a customer change his mind and decide on an Englemann Spruce top over the Master Grade Redwood top I had put aside for him. I'm in need of something of very high quality and my usual go-to-guy - Zootman is only listing 2A and lower grades. Suggestions for sources would be highly appreciated. Thanks |
|
| Author: | Alex Kleon [ Wed Sep 19, 2012 7:50 am ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
Hi Paul - you could try http://www.fine-woods.com/index.html. If you don't see anything suitable, you could try calling to see if they have tops that would be more to your liking. Good luck! Alex |
|
| Author: | Dave Stewart [ Wed Sep 19, 2012 8:04 am ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
Try Larry Stamm http://www.larrystamm.com/ |
|
| Author: | CharlieT [ Wed Sep 19, 2012 10:08 am ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
I recently got some VERY nice bearclaw Engelmann from Bev Finch at Blue Silk. Looks like LaurieW got some similar from LMI. You can read about it and see photos here: viewtopic.php?f=10101&t=37244&hilit=bearclaw+engelmann |
|
| Author: | Tom West [ Wed Sep 19, 2012 12:04 pm ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
Graham Hein at Kootenany Tonewood. Tom |
|
| Author: | CharlieT [ Wed Sep 19, 2012 12:30 pm ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
Tom West wrote: Graham Hein at Kootenany Tonewood. Tom +1 I believe Graham supplies LMI some or all of their Engelmann. Good stuff. |
|
| Author: | Alexandru Marian [ Wed Sep 19, 2012 1:42 pm ] |
| Post subject: | Re: Need immediate source for 3A-4A Englemann Spruce |
Perhaps one of us could supply you with an older top, and very air tight packaged. You don't want to use some green or too wet set.... On Larry Stamm, I heard from a luthier he had some exceptional tops and I sent him an email about it, didn't even bother to reply. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|