Thanks a lot Joey!
Yep they look about the same
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| What tuners are those? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37715 |
Page 1 of 1 |
| Author: | Lavrov Guitars [ Thu Sep 13, 2012 1:54 am ] |
| Post subject: | What tuners are those? |
http://i447.photobucket.com/albums/qq19 ... G_2961.jpg I really want them |
|
| Author: | fingerstyle1978 [ Thu Sep 13, 2012 1:58 am ] |
| Post subject: | Re: What tuners are those? |
Look like these to me. http://www.stewmac.com/shop/Tuners/Guitar,_slotted_peghead_tuners/Grover_18:1_Sta-Tite_Slotted_Peghead_Guitar_Machines.html |
|
| Author: | Lavrov Guitars [ Thu Sep 13, 2012 2:02 am ] |
| Post subject: | Re: What tuners are those? |
Thanks a lot Joey! Yep they look about the same
|
|
| Author: | bluescreek [ Thu Sep 13, 2012 5:39 am ] |
| Post subject: | Re: What tuners are those? |
actually they are Waverley , you have to look close at the shaft. On the Grover tuner they are a machined base and that end area will look different than the Waverley. Look at the way the end of the shaft appears in this photo , that matched your original posted photo http://www.stewmac.com/shop/Tuners/Guit ... heads.html now look at the Grovers , you can now see the difference. http://www.stewmac.com/shop/Tuners/Guit ... hines.html here to can see the machined end . |
|
| Author: | SteveG [ Thu Sep 13, 2012 10:00 am ] |
| Post subject: | Re: What tuners are those? |
Okay, third opinion here. Artinger slotted headstock. Artinger uses Gotoh hardware on his guitars, so it's this tuner : GGS1BB. http://www.lmii.com/carttwo/thirdproduc ... +Open+Gear It matches the details shown. cheers |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|