| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bi- metal bandsaw blades? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37338 |
Page 1 of 1 |
| Author: | ernie [ Fri Aug 03, 2012 10:45 am ] |
| Post subject: | Bi- metal bandsaw blades? |
Last year I bought a bi- metal 1/2in 3-4 tpi hook blade from spectrum supply for my aging mini- max s-45 bandsaw .It was a good value for the $$.I also have 2 other bandsaws an older jet 12in 1/2 hp needs a new blade, used for general cutting /ripping .I was thinking maybe 3/4tpi hook .The other newer bsaw is a craftsman 10 in copy of rikon that came with a crappy blade an has 1/3 hp motor .I like to use the crapsman for small resaw cuts, with the small motor, was figuring a 3/8n 3-4 tpi , but that might be overkill, as the bsaw is used for cutting a lot of small parts, bracing ,bridges necks, etc . Who is your supplier , suggestions??? |
|
| Author: | ernie [ Fri Aug 03, 2012 1:37 pm ] |
| Post subject: | Re: Bi- metal bandsaw blades? |
Are the diamond bsaw blades bi-metal or carbon steel ? |
|
| Author: | ernie [ Fri Aug 03, 2012 7:54 pm ] |
| Post subject: | Re: Bi- metal bandsaw blades? |
thanks got pm from wud |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|