| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Ibex Bender Upgrade http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37310 |
Page 1 of 1 |
| Author: | SteveSmith [ Tue Jul 31, 2012 7:56 pm ] |
| Post subject: | Ibex Bender Upgrade |
I mentioned I was going to modify my Ibex bender based on Howard Kleppers instructions and someone had asked for photos so here they are. The parts I got from Grainger are the same that Howard recommended: TEMPCO Cartridge Heater, 120V, 400 W, 170 W/Sq.-In, Grainger part#4NJJ3, $23.25 ROBERTSHAW Elec Cook Control, Repl INF-120-4339 , Grainger part#6KXF5, $19,59 The typical warnings about electrical work apply: unplug it before you work on it and if you don't know what you're doing then take it to someone who is qualified. Attachment: IMG_0726.JPG Attachment: IMG_0728.JPG Attachment: IMG_0729.JPG Attachment: IMG_0730.JPG Attachment: IMG_0733.JPG Attachment: IMG_0737.JPG Attachment: IMG_0738.JPG Attachment: IMG_0732.JPG
|
|
| Author: | SteveSmith [ Tue Jul 31, 2012 8:04 pm ] |
| Post subject: | Re: Ibex Bender Upgrade |
Attachment: IMG_0739.JPG Attachment: IMG_0740.JPG Attachment: IMG_0741.JPG
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|