Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Binding Identification...?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37157
Page 1 of 1

Author:  sdsollod [ Sat Jul 21, 2012 3:34 pm ]
Post subject:  Binding Identification...?

I bought this binding a while back... I may have gotten it from someone on the OLF. But can't remember what it is and I don't recognized it...

Can oneone identify this binding?

Author:  Tony_in_NYC [ Sat Jul 21, 2012 3:41 pm ]
Post subject:  Binding Identification...?

Could be bocote. I know there was a load for sale a while back.

Author:  CharlieT [ Sat Jul 21, 2012 4:06 pm ]
Post subject:  Re: Binding Identification...?

Looks kinda Honduran rosewoodish.

Author:  matt jacobs [ Sat Jul 21, 2012 4:09 pm ]
Post subject:  Re: Binding Identification...?

Looks like Hond. RW to me

Author:  James Ringelspaugh [ Sat Jul 21, 2012 6:12 pm ]
Post subject:  Re: Binding Identification...?

Looks like bocote to me; could be zebrawood. I would bet against Honduran rosewood. Definitely not Pau Ferro as you can see some large pores.

Author:  B. Howard [ Sun Jul 22, 2012 6:56 am ]
Post subject:  Re: Binding Identification...?

Not Zebra wood, unless the color rendering is way off. Doesn't look dark enough to be Bocote. Looks like a rosewood of some type to me. Does it have any odor when scrapes or sanded?

Author:  klooker [ Sun Jul 22, 2012 8:16 am ]
Post subject:  Re: Binding Identification...?

Looks sort of like Bubinga but grain is tighter.

Does it smell like anything? Bubinga & Zebrano stink.

Kevin Looker

Author:  DennisK [ Sun Jul 22, 2012 8:25 am ]
Post subject:  Re: Binding Identification...?

+1 to Honduran rosewood.

Author:  bftobin [ Sun Jul 22, 2012 8:47 am ]
Post subject:  Re: Binding Identification...?

It looks a lot like some Amazon rosewood I bought recently. It would appear to be a rosewood of some kind. Nice stuff !!!

Author:  sdsollod [ Sun Jul 22, 2012 10:29 am ]
Post subject:  Re: Binding Identification...?

Okay - the winner is Honduran Rosewood.

Matt PMed me and reminded me that I had bought the binding from him. He helped me out by selling me a set of black limba sides after I broke one during bending. I bought the binding from him at the same time.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/