| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Neck geometry video http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37145 |
Page 1 of 1 |
| Author: | Tom West [ Thu Jul 19, 2012 7:51 pm ] |
| Post subject: | Neck geometry video |
Folks may want to check out this 1 hour video by a presenter and discussion group on the subject of neck set geometry.Worth a look. Sorry I can't give a direct link,a bit inept with that sort of thing. Youtube Mike Haney final 2.aiv Tom |
|
| Author: | Fred Tellier [ Thu Jul 19, 2012 7:57 pm ] |
| Post subject: | Re: Neck geometry video |
| Author: | Tom West [ Thu Jul 19, 2012 8:08 pm ] |
| Post subject: | Re: Neck geometry video |
Thanks Fred.....!! Feel awful to be so bad around a computer. Tom |
|
| Author: | bluescreek [ Thu Jul 19, 2012 9:34 pm ] |
| Post subject: | Re: Neck geometry video |
this was Mike Haney at the Mid Atlantic Luthiers meeting a few months ago. http://www.midatlanticluthiers.org/ |
|
| Author: | ernie [ Fri Jul 20, 2012 7:49 am ] |
| Post subject: | Re: Neck geometry video |
well done , information |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|