Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Dovetail Bit http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37129 |
Page 1 of 1 |
Author: | segovia [ Tue Jul 17, 2012 4:09 pm ] |
Post subject: | Dovetail Bit |
Hi Is there a standard (recommended) dovetail bit angle, they come in anything from 7 degrees and upwards. What angel, depth and diameter do you use, assuming you are not using the stew-mac bit with the guide John |
Author: | woody b [ Tue Jul 17, 2012 5:23 pm ] |
Post subject: | Re: Dovetail Bit |
This is the bit I use. http://www.woodcraft.com/Product/2008143/6369/Whiteside-D7625-Dovetail-Router-Bit-7-Degree-12-SH-58-D-x-78-C-x-258-OL.aspx It's 7 degree, 5/8" diameter, with a 1/2" shank. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |