| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 0 size guitar case? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37060 |
Page 1 of 1 |
| Author: | Freeman [ Mon Jul 09, 2012 9:09 pm ] |
| Post subject: | Re: 0 size guitar case? |
The more or less 0 size that I built from the Scott Antes plans fit perfectly in a TKL case that I bought from either MF or Elderly. TKL and Cedar Creek, their custom case division, have all the dimentions on line. |
|
| Author: | TimAllen [ Tue Jul 10, 2012 1:01 am ] |
| Post subject: | Re: 0 size guitar case? |
I was hunting around for one a few years ago, and it seemed that Elderly is the main source for 0 size cases. Most dealers don't carry them. If they think about it at all, they think an 0 size is the same thing as a parlor guitar. I found that Gator makes an inexpensive 3/4 size case that just fits a Martin 0 in the body area, but is 3/8" too short for the neck. : p |
|
| Author: | Tim C. [ Tue Jul 10, 2012 2:33 am ] |
| Post subject: | Re: 0 size guitar case? |
I just bought a Roadrunner molded case "classical" for an 0 size that I just finished. It fits pretty good. Got it at a local Guitar Center, I think the link below is to the case I bought. Mine was missing the RR insignia and the tags so i got it fo 69 bucks, but the did say it was a classical size. http://www.guitarcenter.com/Road-Runner ... 1598921.gc Tim |
|
| Author: | ChuckB [ Tue Jul 10, 2012 5:35 am ] |
| Post subject: | Re: 0 size guitar case? |
Tamarkin Company is where I get my 14 fret 0 size cases. The DT 900 will fit a 13.5" lower bout, 10" upper bout, 39" overall length and 5" deep. Nice hard shell case for around $60 plus shipping. Talk to John, 800 521 5464. If you need any other measurements, I have one here and will be able to respond later this afternoon. Chuck |
|
| Author: | grumpy [ Tue Jul 10, 2012 9:28 am ] |
| Post subject: | Re: 0 size guitar case? |
For the Canadians among us here, Heinl in Toronto stock a very nice 0 size case. Just have to ask for it... http://www.georgeheinl.com/ |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|