Direct from the source: http://www.shop3m.com/3m-regular-sheets-xzlg11dvnt.html
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Wet/dry sandpaper http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37035 |
Page 1 of 1 |
| Author: | Chris Ensor [ Sat Jul 07, 2012 3:20 pm ] |
| Post subject: | Wet/dry sandpaper |
In the past I have bought my wet/dry sandpaper from autozone here locally. But they only sell it in packs of 3 sheets. Anybody have a better source for 1000, 1500, 2000 grit 3M wet/dry paper in larger quantities? |
|
| Author: | Eric Reid [ Sat Jul 07, 2012 3:43 pm ] |
| Post subject: | Re: Wet/dry sandpaper |
Fox Run Tools has good prices. http://www.foxruntools.com/sheetpaper.aspx?page=4. They have 3M wet-or-dry up to 2500 grit. I also buy the Fre-Cut Gold there (up to 800 grit). They have other brands as well. |
|
| Author: | DC Ross [ Sat Jul 07, 2012 3:44 pm ] |
| Post subject: | Re: Wet/dry sandpaper |
Direct from the source: http://www.shop3m.com/3m-regular-sheets-xzlg11dvnt.html
|
|
| Author: | B. Howard [ Sun Jul 08, 2012 7:05 am ] |
| Post subject: | Re: Wet/dry sandpaper |
Try your local auto body supplier. |
|
| Author: | Billy T [ Sun Jul 08, 2012 2:44 pm ] |
| Post subject: | Re: Wet/dry sandpaper |
B. Howard wrote: Try your local auto body supplier. +1
|
|
| Author: | Tony_in_NYC [ Mon Jul 09, 2012 10:32 am ] |
| Post subject: | Re: Wet/dry sandpaper |
Autobody supply is the way to go but some of them are very expensive. Online might be a better choice. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|