http://www.amazon.com/gp/product/B002BWOS6C/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0017J1JVM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1YKFEHQZSTDT3CMYYJ2D
?
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Belleville washers http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=36995 |
Page 1 of 1 |
| Author: | dberkowitz [ Tue Jul 03, 2012 1:30 pm ] |
| Post subject: | Belleville washers |
Anyone got a good supplier for black belleville washers, .255"id? |
|
| Author: | James Ringelspaugh [ Tue Jul 03, 2012 1:43 pm ] |
| Post subject: | Re: Belleville washers |
http://www.mcmaster.com/nav/enter.asp?partnum=9712K21 ? |
|
| Author: | dberkowitz [ Wed Jul 04, 2012 7:57 am ] |
| Post subject: | Re: Belleville washers |
Gracias! |
|
| Author: | Tai Fu [ Thu Jul 05, 2012 9:35 pm ] |
| Post subject: | Re: Belleville washers |
any source that ships outside of the US (Mcmaster doesn't)? |
|
| Author: | Barry Daniels [ Fri Jul 06, 2012 7:40 am ] |
| Post subject: | Re: Belleville washers |
David, Can I ask what you are using these for? Neck bolts? |
|
| Author: | dberkowitz [ Fri Jul 06, 2012 11:24 am ] |
| Post subject: | Re: Belleville washers |
Yes. |
|
| Author: | dberkowitz [ Sun Jul 08, 2012 9:15 am ] |
| Post subject: | Re: Belleville washers |
Lex, these are stainless. I was looking for black. |
|
| Author: | James Ringelspaugh [ Sun Jul 08, 2012 2:17 pm ] |
| Post subject: | Re: Belleville washers |
http://www.amazon.com/gp/product/B002BWOS6C/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0017J1JVM&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1YKFEHQZSTDT3CMYYJ2D ?
|
|
| Author: | James Ringelspaugh [ Sun Jul 08, 2012 2:25 pm ] |
| Post subject: | Re: Belleville washers |
but seriously, this may work: http://www.amazon.com/Belleville-Washer ... le+washers |
|
| Author: | ANeat [ Sun Jul 08, 2012 6:25 pm ] |
| Post subject: | Re: Belleville washers |
The ones in McMaster are regular steel (black) or stainless |
|
| Author: | dberkowitz [ Mon Jul 09, 2012 6:10 am ] |
| Post subject: | Re: Belleville washers |
ANeat, if you can show me where they have black belleville's in a .255x.5" format, I'd like to know. They have black ones in a smaller format with ridged surfaces for locking, but not in .5"OD. |
|
| Author: | ANeat [ Mon Jul 09, 2012 10:37 am ] |
| Post subject: | Re: Belleville washers |
On the link provided above the stainless steel are listed on the far right column, and the carbon steel are listed to the left of that. Part numbers are 9721k61 9721k62 9721k63 and 9721k64 are all the .255 id .5od .018, .022, .025 and .038 thickness. Are the carbon steel "black" I cant say for sure, but If I needed black I would get the carbon steel, if they werent black a little cold blueing would take care of it. |
|
| Author: | David Malicky [ Mon Jul 09, 2012 1:44 pm ] |
| Post subject: | Re: Belleville washers |
McMaster's descriptions are normally very accurate, so if no finish is specified, I'd assume it is uncoated steel. A black finish would normally say "black oxide". |
|
| Author: | Rod True [ Mon Jul 09, 2012 6:00 pm ] |
| Post subject: | Re: Belleville washers |
Hi David, these are not listed as black but they are the size you're after. http://www.fastenal.com/web/products/de ... ku=0123993 These ones are in black, but smaller OD and slightly larger ID http://www.fastenal.com/web/products/de ... ku=0130152 |
|
| Author: | woodrat [ Sun Jul 15, 2012 12:34 am ] |
| Post subject: | Re: Belleville washers |
I searched ebay for them....I got them out of the States to AUS no worries....black and id .255 for neck bolts.... ...looking at the amazon link they come from Page Auto....the same mob I got them on eBay through.... John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|