| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Courtnall Fleta Plan http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=36803 |
Page 1 of 1 |
| Author: | ernie [ Fri Jun 15, 2012 11:11 am ] |
| Post subject: | Courtnall Fleta Plan |
Has anyone out there built a classical gtr using these plans.I also have the modified fleta plan from the gore/gilet book. My question concerns the bracing on the plan,Since I used a cedar top I made my bridge patch 2.2mm spruce instead of the listed 1.5mm. My fan braces are also a tad narrower.The plan calls for braces 6mm high by 5mm w..The fan braces are also a tad shorter in length from the plan abt 3--10 mm. This is my first fleta style plan so any input , ideas or suggestions that you have used successfully would be appreciated thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|