Official Luthiers Forum!

Has anyone out there built a classical gtr using these plans.I also have the modified fleta plan from the gore/gilet book. My question concerns the bracing on the plan,Since I used a cedar top I made my bridge patch 2.2mm spruce instead of the listed 1.5mm. My fan braces are also a tad narrower.The plan calls for braces 6mm high by 5mm w..The fan braces are also a tad shorter in length from the plan abt 3--10 mm. This is my first fleta style plan so any input , ideas or suggestions that you have used successfully would be appreciated thanks.