I have used ca for bindings for the last 10 years and I always do both seams.
Be very careful that you don't use too much as it will run inside. Dont ask me how I know...
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| CA glue for bindings question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=36600 |
Page 1 of 1 |
| Author: | Imbler [ Fri May 25, 2012 10:27 pm ] |
| Post subject: | CA glue for bindings question |
I installed the back bindings (rosewood) on my guitar using CA, and it appeared to have worked out. I applied the glue to the joint between the back and binding and let it wick in. Do I also need to apply glue to the joint between the side and the binding? thanks for any help! Mike |
|
| Author: | LanceK [ Fri May 25, 2012 10:34 pm ] |
| Post subject: | Re: CA glue for bindings question |
I have used ca for bindings for the last 10 years and I always do both seams. Be very careful that you don't use too much as it will run inside. Dont ask me how I know...
|
|
| Author: | Imbler [ Sat May 26, 2012 8:03 am ] |
| Post subject: | Re: CA glue for bindings question |
Thanks Lance! I'll do both seams. Thanks for giving me the benefit of your experience - I had read a number of descriptions of the process, but none of them stated exactly where to apply the glue, Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|