| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| neck finish question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=35975 |
Page 1 of 1 |
| Author: | WendyW [ Sat Mar 31, 2012 12:20 pm ] |
| Post subject: | neck finish question |
When finishing the neck with a different finish than the rest of the guitar, how is the side of the fretboard handled? This is for a classical, so the neck and fingerboard are already part of the guitar, not separate. If I finish the side of the fretboard with whatever I use on the neck, then do I continue that on the fretboard extension over the soundboard? Thanks, Wendy |
|
| Author: | WaddyThomson [ Sat Mar 31, 2012 1:52 pm ] |
| Post subject: | Re: neck finish question |
I do. Don't know about others. |
|
| Author: | John Arnold [ Sat Mar 31, 2012 3:33 pm ] |
| Post subject: | Re: neck finish question |
I have never found a good reason to have any finish on the side of an ebony fretboard. |
|
| Author: | CharlieT [ Sat Mar 31, 2012 3:49 pm ] |
| Post subject: | Re: neck finish question |
John Arnold wrote: I have never found a good reason to have any finish on the side of an ebony fretboard. John - probably a dumb question but how do you accomplish that without having a "ridge" of finish where the neck wood and ebony fretboard meet? Thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|