| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| kerfed lining width http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=35875 |
Page 1 of 1 |
| Author: | roby [ Sat Mar 24, 2012 4:37 am ] |
| Post subject: | kerfed lining width |
Hello all i'm in the process of making some triangular kerfing 6mm wide by 15mm deep, i then thought if i decided to use a wide purfling scheme ,say 6mm plus 1.5mm binding should i make some wider kerfing? Thanks all Roby |
|
| Author: | woody b [ Sat Mar 24, 2012 6:00 am ] |
| Post subject: | Re: kerfed lining width |
I think I would, or glue a solid lining ~2mm on the glue your kerfed lining on top of it. |
|
| Author: | Ti-Roux [ Sat Mar 24, 2012 12:29 pm ] |
| Post subject: | Re: kerfed lining width |
Purflings don't go through the top... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|