| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Size of Weissenborn Wood http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=35252 |
Page 1 of 1 |
| Author: | Dan Pennington [ Fri Feb 03, 2012 9:52 pm ] |
| Post subject: | Size of Weissenborn Wood |
What are the dimensions for the average size Weissenborn wood - sides & back and top? |
|
| Author: | alan stassforth [ Fri Feb 03, 2012 11:49 pm ] |
| Post subject: | Re: Size of Weissenborn Wood |
I have the Stew-Mac plans, and it says .095" back and sides, and I think the top is .110, but, it really depends on the wood you are using. That's all I can tell ya. I'm still going round and round with this. All the bracing sizes on this plan are .380", square. So, I think that needs some changing. |
|
| Author: | Mike Dotson [ Sat Feb 04, 2012 12:49 am ] |
| Post subject: | Re: Size of Weissenborn Wood |
I'll have to dig out my patterns to be 100% but I'm fairly sure the top/backs are 8X35 and the sides 4X42. I use slightly deeper than average sides and the shape is my own but is pretty close dimension-wise the standard Weiss. |
|
| Author: | Dan Pennington [ Sat Feb 04, 2012 11:21 am ] |
| Post subject: | Re: Size of Weissenborn Wood |
Mike Dotson wrote: I'll have to dig out my patterns to be 100% but I'm fairly sure the top/backs are 8X35 and the sides 4X42. I use slightly deeper than average sides and the shape is my own but is pretty close dimension-wise the standard Weiss. Thanks, Mike, those are the numbers I need. Dan |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|