| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Source for longer veneer sheets http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=35056 |
Page 1 of 1 |
| Author: | crich [ Sat Jan 21, 2012 7:52 pm ] |
| Post subject: | Source for longer veneer sheets |
All the veneer sheets I'm finding are only 36" in length. I would like 42". Anyone know where I might find some? Also looking for unslotted bloodwood bridge pins. Clinton |
|
| Author: | Heath Blair [ Sat Jan 21, 2012 8:59 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
not sure what kind of veneer youre looking for, but... http://www.certainlywood.com has just about everything. |
|
| Author: | KHageman [ Sat Jan 21, 2012 8:59 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Check out Ebay. Put in "Wood Veneer" and you have a huge choice of material. Most of the time you will even fine black dyed veneer for makeing BWBW (etc) purfling. There is one seller in North Carolina and a couple in Indiana and Kentucky who have a great selection of material. Many of the Ebay sellers represent architectural veneer dealers and sell their odds and ends or orphan sheets. Give it a try. Ken |
|
| Author: | toddb [ Sat Jan 21, 2012 9:09 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Carlton's in Atlanta has a quite a selection of large sheets. You might want to give them a try. http://www.rarewoodsandveneers.com/pages/home.htm |
|
| Author: | Dave Fifield [ Sat Jan 21, 2012 9:29 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Or there's B & B Rare Woods..... Dave F. |
|
| Author: | crich [ Sat Jan 21, 2012 10:58 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Thanks guys! I appreciate all the leads. Looks like I'm shopping tomorrow. Clinton |
|
| Author: | Jim_H [ Sat Jan 21, 2012 11:06 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Someone turned me on to Constantines a while back. You might peruse their selections http://www.constantines.com/veneer.aspx |
|
| Author: | Chris Pile [ Sat Jan 21, 2012 11:24 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Quote: Someone turned me on to Constantines a while back. I was gonna suggest them. They used to sell big pieces called "door skins". |
|
| Author: | Mike Lindstrom [ Sun Jan 22, 2012 12:50 am ] |
| Post subject: | Re: Source for longer veneer sheets |
Dave Fifield wrote: I was just there the other day. Lots of beautiful stuff. Mike |
|
| Author: | TonyKarol [ Sun Jan 22, 2012 5:31 pm ] |
| Post subject: | Re: Source for longer veneer sheets |
Any decent hardwood shop should have veneers in 8 or 10 foot lengths .. a couple here in Ontario have lots. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|