Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Abalam?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=34969
Page 1 of 1

Author:  B. Howard [ Sun Jan 15, 2012 8:29 am ]
Post subject:  Abalam?

I have some Abalam rosette strips that I picked up along the way. They are 5 pc sets, I'm not sure what diameter they work out too as they are still carded. Rather than do a single ring of shell I would like to do an inner and outer border on a wood rosette with them. Can these be "snapped" in place as one would do with typical shell strips when doing purfling? Also, I would like to have these Abalam borders meet right against the spruce, without a purfling line but my concern is that the spruce may be too soft and the edge of the channel get chewed up when I snap the shell in, any thoughts on this? Thanks.

Author:  bluescreek [ Sun Jan 15, 2012 2:32 pm ]
Post subject:  Re: Abalam?

Sure can. Call me Brian I have do it many times and can talk you through the procedure

Author:  B. Howard [ Tue Jan 17, 2012 7:06 pm ]
Post subject:  Re: Abalam?

Thanks John, we can talk about it Sunday. Don't forget to bring a small bottle of fish glue.

Author:  bluescreek [ Tue Jan 17, 2012 7:09 pm ]
Post subject:  Re: Abalam?

yup

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/