| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Making binding gluing to veneerpurfling sandwich http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=34392 |
Page 1 of 1 |
| Author: | ernie [ Tue Nov 29, 2011 9:28 am ] |
| Post subject: | Making binding gluing to veneerpurfling sandwich |
I/ve cut up 8 pcs of anigre 1in by 36in long by 5.5mm thick veneer to glue to a 3 ply veneer of 1.8mm B/W/M. I have abt 8 different glues on hand . Will bend this at 250 deg f on an alum overholtzer CL jig. I have the following glues, which would be the most heat resistant ?? hide glue 192 test , white PVA, titebond original, CA, system 3 epoxy #2 30 min time, gorilla white, very short open time 5 min , elmers glue all . titebond new translucent glue ?? |
|
| Author: | TonyKarol [ Tue Nov 29, 2011 4:53 pm ] |
| Post subject: | Re: Making binding gluing to veneerpurfling sandwich |
Well, I only use TB origianl for gluing up binding ... works just fine for me. I bend everything hot and fairly quick in the fox .. maybe 300-320 ... |
|
| Author: | B. Howard [ Tue Nov 29, 2011 7:37 pm ] |
| Post subject: | Re: Making binding gluing to veneerpurfling sandwich |
+1 on TB original. Tape mine together a few places,in pairs. Wrap in tin foil and bend on the hot pipe when I do the sides. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|