| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Cutting soundhole and rosettes http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=34039 |
Page 1 of 1 |
| Author: | johnwalkerwaldsmith [ Thu Oct 27, 2011 10:56 am ] |
| Post subject: | Cutting soundhole and rosettes |
Can anyone give me some tips or secrets on how you cut soundholes and rosettes without the stew mac fly cutter thing.... |
|
| Author: | Michael.N. [ Thu Oct 27, 2011 11:03 am ] |
| Post subject: | Re: Cutting soundhole and rosettes |
|
|
|
| Author: | Quine [ Thu Oct 27, 2011 12:44 pm ] |
| Post subject: | Re: Cutting soundhole and rosettes |
Laminate trimmer with a circle cutting base I ginned up. Pretty similar concept to Michael N. but with a laminate trimmer in place of the blade |
|
| Author: | WaddyThomson [ Thu Oct 27, 2011 12:46 pm ] |
| Post subject: | Re: Cutting soundhole and rosettes |
I have a Wells Karol jig, but still use my hand made circle cutter. |
|
| Author: | jfmckenna [ Thu Oct 27, 2011 3:08 pm ] |
| Post subject: | Re: Cutting soundhole and rosettes |
I use a Bosch Colt and a homemade circle cutter. But I always line it out with a Popsicle stick cutter as shown in the second post. That way it comes off real clean on the edge. |
|
| Author: | johnwalkerwaldsmith [ Thu Oct 27, 2011 4:22 pm ] |
| Post subject: | Re: Cutting soundhole and rosettes |
freakin genius, Thanks Guys! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|