| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| LR Baggs EAS pickup installation http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=33829 |
Page 1 of 1 |
| Author: | Mike OMelia [ Mon Oct 10, 2011 2:32 pm ] |
| Post subject: | LR Baggs EAS pickup installation |
Now, I'm good with tools, not afraid of electronics, and am certain I can tackle this.  But I wanted advice before I proceeded. This pickup (http://www.lrbaggs.com/Manuals/element_ ... manual.pdf) has a volume knob that hides in the sound hole. But it is wider than the 1/2" hole for the preamp. AFAIK, no way to get it through. The manual says nothing about this.  So, what is the normal procedure? Cut the wires and solder?Mike Edit: Never mind.  
|
|
| Author: | Rod True [ Mon Oct 10, 2011 3:05 pm ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
You did pass everything through the soundhole right 
|
|
| Author: | Mike OMelia [ Tue Oct 11, 2011 12:16 am ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
Rod True wrote: You did pass everything through the soundhole right Rod, Like I almost said, brain fart. Mike |
|
| Author: | Rod True [ Tue Oct 11, 2011 12:43 am ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
Mike O'Melia wrote: Rod True wrote: You did pass everything through the soundhole right Rod, Like I almost said, brain fart. Mike No worries, we all have them
|
|
| Author: | Dave Fifield [ Tue Oct 11, 2011 12:58 am ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
This should qualify you for the next DOTM award Mike!  Dave F. |
|
| Author: | Mike OMelia [ Tue Oct 11, 2011 7:07 am ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
Dave Fifield wrote: This should qualify you for the next DOTM award Mike! Dave F. No doubt. Edit: Although damage to the product did not occur, it might have. And had the pickup had flesh sensing technology (or better yet, doofus sensing technology) it would have jumped out of my hands and back into the box and left me to my own devices until I finally read the ENTIRE manual. 
|
|
| Author: | Mike OMelia [ Tue Oct 11, 2011 10:42 am ] |
| Post subject: | Re: LR Baggs EAS pickup installation |
see edit above |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|