| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Custom Pin Maker http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=33571 |
Page 1 of 1 |
| Author: | TonyFrancis [ Mon Sep 19, 2011 4:29 am ] |
| Post subject: | Custom Pin Maker |
Does anyone know of someone who can do small but quality runs of custom spec pins for a very special project? I had tried PM'ing Louis Freilicher after Hesh's thread a couple years back but no reply. Thanks in advance! |
|
| Author: | Ken Franklin [ Mon Sep 19, 2011 9:57 am ] |
| Post subject: | Re: Custom Pin Maker |
Try Burton LeGeyt http://legeytguitars.com/ from the forum. |
|
| Author: | ernie [ Mon Sep 19, 2011 10:35 am ] |
| Post subject: | Re: Custom Pin Maker |
Tony I got a 50 piece set of ebony end pins with ab dots from a fellow in china (hong kong) for $40 last year. He is a seller on e- bay usa guitar parts, he also sells assorted ebony bridge pins. If you asked him , he might be able to do a run of 50. His price is negotiable, and his english is poor , so a diagram would be in order. I believe there are other sellers as well there from india, where I got my ebony bridge pins w MOP dot cheers ernie |
|
| Author: | Rod True [ Mon Sep 19, 2011 11:01 am ] |
| Post subject: | Re: Custom Pin Maker |
You could try Bill Wise at Cheris (sp?) guitars, he makes buttons, might make pins. |
|
| Author: | Jim_H [ Mon Sep 19, 2011 11:13 am ] |
| Post subject: | Re: Custom Pin Maker |
You might see if Gurian can help... http://www.gurianinstruments.com/produc ... idge-pins/ Can't hurt to try... |
|
| Author: | Burton LeGeyt [ Mon Sep 19, 2011 11:56 am ] |
| Post subject: | Re: Custom Pin Maker |
Tony, I do make these, usually a set or two here or there for people who need something very specific but I have done larger runs too. I am a little backed up at the moment but if your lead time is not super tight I would be glad to help. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|