| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Tuners for a cittern http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=33544 |
Page 1 of 1 |
| Author: | cgal_1 [ Fri Sep 16, 2011 9:48 am ] |
| Post subject: | Tuners for a cittern |
Just about to carve the neck for a cittern ( by accident, should have been an octave mandola- see mandolin thread). Looking for suitable machine heads, Grover seem to do a small one but I can't find alternatives. It looks as though I'll have to buy 2 sets of six and not use 2 of them unless I can buy single heads. Anyone any thoughts or experiences of this? |
|
| Author: | Clay S. [ Fri Sep 16, 2011 6:27 pm ] |
| Post subject: | Re: Tuners for a cittern |
If you buy a left and right set of six on a side Kluson deluxe style tuners you can have the compact spacing a 12 string uses. You do end up with two extra tuners. I have also cut down 6 on a plate twelve string tuners and reshaped the cut end for aesthetics. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|