bluescreek wrote:
ball end allen wrench. I have US standard and Metric sets in the shop . They come in handy
John cheers for the reply but I was interested in just the fitting as circled here and not the wrench
Cheers
Dave
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Two way Truss Rod fittings http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=33339 |
Page 1 of 1 |
| Author: | dazzer [ Sat Aug 27, 2011 9:28 am ] |
| Post subject: | Two way Truss Rod fittings |
I was wondering what the proper name was for the allen nut thing on a two way Truss rod for turning the truss rod in either direction? Dave |
|
| Author: | bluescreek [ Sat Aug 27, 2011 8:30 pm ] |
| Post subject: | Re: Two way Truss Rod fittings |
ball end allen wrench. I have US standard and Metric sets in the shop . They come in handy |
|
| Author: | dazzer [ Sat Aug 27, 2011 9:21 pm ] |
| Post subject: | Re: Two way Truss Rod fittings |
bluescreek wrote: ball end allen wrench. I have US standard and Metric sets in the shop . They come in handy John cheers for the reply but I was interested in just the fitting as circled here and not the wrench Cheers Dave |
|
| Author: | SteveG [ Sat Aug 27, 2011 9:49 pm ] |
| Post subject: | Re: Two way Truss Rod fittings |
You're talking about the socket head part? Try truss rod nut. Here's a link to Allparts in the UK. http://www.allparts.uk.com/online-shop/ ... 5_128.html At least it's a start... cheers |
|
| Author: | dazzer [ Sat Aug 27, 2011 10:13 pm ] |
| Post subject: | Re: Two way Truss Rod fittings |
SteveG wrote: You're talking about the socket head part? Try truss rod nut. Cheers Steve I'm one dumb donut   Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|