| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| African Blackwood Bridge Blank -- Needed http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32911 |
Page 1 of 1 |
| Author: | SimonF [ Tue Jul 19, 2011 12:54 am ] |
| Post subject: | African Blackwood Bridge Blank -- Needed |
I can purchase one online but this stuff takes forever to dry and I need to use one right away for a build that I know has been properly seasoned. The minimum dimensions I need are 7" long x 1.75" deep x .400" thick. I need those dimensions useable - so the surfaces must be relatively flat or the blank needs to be larger. I am looking for very tight, clear grain - in other words, very high grade stuff. If you can ship it to me priority then I will send PayPal/check for $25. Many Thanks, Simon |
|
| Author: | Laurent Brondel [ Tue Jul 19, 2011 5:25 am ] |
| Post subject: | Re: African Blackwood Bridge Blank -- Needed |
Simon, email or PM me with your address and I'll send a blank tomorrow the latest. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|