Official Luthiers Forum!
http://www.luthiersforum.com/forum/

How big are your nuts?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32896
Page 1 of 1

Author:  Scott A [ Sun Jul 17, 2011 6:04 pm ]
Post subject:  How big are your nuts?

No really...I'm at the point where I'm about to carve the neck and I'm not sure how wide the nut should be.
I'm building my version of an OM

Any help is appreciated

Author:  klooker [ Sun Jul 17, 2011 6:20 pm ]
Post subject:  Re: How big are your nuts?

If you want to make an OM per Martin specs, follow Todd's info, but it's up to you or the player's preference. I have fat fingers and prefer 1-3/4" as compared to 1-11/16" spacing common on Dreds. I'm a newbie player & it's amazing how easy it is to feel 1/16" of difference.

Kevin Looker

Author:  Jim Watts [ Sun Jul 17, 2011 7:10 pm ]
Post subject:  Re: How big are your nuts?

I also use .235-ish for nut thickness and 1-3/4 width.

Author:  TonyKarol [ Sun Jul 17, 2011 8:36 pm ]
Post subject:  Re: How big are your nuts?

3/16s ....

Author:  theguitarwhisperer [ Sun Jul 17, 2011 9:27 pm ]
Post subject:  Re: How big are your nuts?

I like the 1 11/16 by 3/16th's.

Author:  Rod True [ Sun Jul 17, 2011 10:45 pm ]
Post subject:  Re: How big are your nuts?

I like 1-23/32" width at the nut and 3/16" nut thickness.

Author:  Chas Freeborn [ Sun Jul 17, 2011 10:56 pm ]
Post subject:  Re: How big are your nuts?

freakin' huge... oops, did I say that... oooh those nuts..
1/4" from stem to stern and what ever width the particular case calls for. 1-7/8" (neck width) wide for fingerstyle guitars and narrower for flat pickers.

Author:  DennisK [ Mon Jul 18, 2011 12:12 am ]
Post subject:  Re: How big are your nuts?

Nut thickness is 3/16". No real reason not to make it more or less.

Nut width is player preference and is only one piece of the overall string spacing scheme, so it depends. There have been many threads about it over at acousticguitarforum.com, so go search over there for lots of perspectives. I have big hands, so my preference is 1 7/8" nut width, 2 1/4" bridge spacing. I can't really play 1 11/16" nut width. Fingertips are just too wide to fret individual strings at the first few frets without also muting at least one neighbor. 1 3/4" is ok, but still a little tight.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/