| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| I need help finding some Rosewood http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32805 |
Page 1 of 1 |
| Author: | mdubs712 [ Sat Jul 09, 2011 6:52 am ] |
| Post subject: | I need help finding some Rosewood |
I am working on an archtop electric and I will be using a rosewood fingerboard. I would like to use rosewood for the tailpiece as well as the pick up rings, but all I see on Stewmac and Lmii is ebony tailpiece blanks. I thought about using a fingerboard blank but at around 5/16ths thick and only 2 1/2 wide I would have to laminate to get something useable I would much rather start with a solid block for this. I am around 45 mins from any hardwood suppliers, though I'm sure if I made the trip I would find what I am looking for but does anyone know of a site I could obtain some rosewood around 5 x 3 1/2 x 1/2? thanks, Mike |
|
| Author: | Clinchriver [ Sat Jul 09, 2011 7:25 am ] |
| Post subject: | Re: I need help finding some Rosewood |
Try http://www.gilmerwood.com/ they seem to have a little bit of everything. Nice folks to deal with. |
|
| Author: | Mike Franks [ Sat Jul 09, 2011 7:33 am ] |
| Post subject: | Re: I need help finding some Rosewood |
Uncle Bob at RC Tonewood should be able to hook you up. 716 874-1498 or PM Bob Cefalu. Mike Franks www.mjfranksguitar.com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|