| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Conveyor for Delta 18" Drum Sander in Canada http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32155 |
Page 1 of 1 |
| Author: | Mike K [ Tue May 10, 2011 12:31 pm ] |
| Post subject: | Conveyor for Delta 18" Drum Sander in Canada |
Anyone know of a supplier of a replacement conveyor belt for an 18" Delta drum sander in Canada? Thanks! Mike |
|
| Author: | Alex Kleon [ Tue May 10, 2011 3:16 pm ] |
| Post subject: | Re: Conveyor for Delta 18" Drum Sander in Canada |
Hi Mike - You can try contacting Busy Bee Tools. They sell the Delta drum sander, so they should be able to put you in the right direction. Here's the link: http://www.busybeetools.com/ . If you are in the Toronto area, call the Pickering store. Their staff have always been really helpful to me. Good luck! Alex |
|
| Author: | jm2 [ Tue May 10, 2011 4:58 pm ] |
| Post subject: | Re: Conveyor for Delta 18" Drum Sander in Canada |
As someone who has been buying from Busy Bee for over twenty-five years, I can safely say that some staff are helpful, sometimes : -) There have been just as many times where I have not been too happy with their customer service. It varies from employee to employee. Another place to try is TJV Tools, in Mississauga. Now those guys know service. They are my choice for big machinery purchases. I usually deal with Joe. They are an authorized Delta Dealer. They will match prices. http://www.tjvwoodworking.ca/ Federated Tools in London is another Delta dealer that David Wren recommended here recently. |
|
| Author: | Mike K [ Wed May 11, 2011 5:24 pm ] |
| Post subject: | Re: Conveyor for Delta 18" Drum Sander in Canada |
Thanks for the recommendations! -Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|