| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Micro Mesh Source http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32124 |
Page 1 of 1 |
| Author: | joe white [ Fri May 06, 2011 5:58 pm ] |
| Post subject: | Micro Mesh Source |
I have been looking around the net for a supplier of micro mesh that will sell individual grits. All I can find are kits with numerous grits that I have no use for. Is there a source? |
|
| Author: | David Barnett [ Fri May 06, 2011 6:12 pm ] |
| Post subject: | Re: Micro Mesh Source |
You can order direct from Micro-Surface Finishing Products, Inc. Individual sheets: http://micro-surface.com/index.php?main ... ducts_id=5 Manufacturer's website: http://micro-surface.com/index.php Another supplier is The Compleat Sculptor: http://www.sculpt.com/catalog_98/abrasi ... romesh.htm |
|
| Author: | pvg [ Fri May 06, 2011 6:14 pm ] |
| Post subject: | Re: Micro Mesh Source |
Lee Valley carries individual grits of 8x11 sheets.http://www.leevalley.com/US/wood/page.a ... at=1,43072 I thought they also used to have them at our (used to be) local Woodcraft store too. ?? Also I think these are common for automobile painting/finishing; ya might try auto parts stores or paint companies that specialize in auto paints. pvg |
|
| Author: | David Barnett [ Fri May 06, 2011 6:19 pm ] |
| Post subject: | Re: Micro Mesh Source |
pvg wrote: Lee Valley carries individual grits of 8x11 sheets.http://www.leevalley.com/US/wood/page.a ... at=1,43072 Those are 3M micro-abrasive sheets, Philip, not Micro-Mesh, which are a cushioned abrasive and quite different. |
|
| Author: | jmanter [ Fri May 06, 2011 6:47 pm ] |
| Post subject: | Re: Micro Mesh Source |
www.rockler.com/product.cfm?page=6461 |
|
| Author: | pvg [ Sat May 07, 2011 12:16 pm ] |
| Post subject: | Re: Micro Mesh Source |
David Barnett wrote: pvg wrote: Lee Valley carries individual grits of 8x11 sheets.http://www.leevalley.com/US/wood/page.a ... at=1,43072 Those are 3M micro-abrasive sheets, Philip, not Micro-Mesh, which are a cushioned abrasive and quite different.  sorry, my mistake; hope I didn't lead anyone astray...Ya learn something new every day  pvg |
|
| Author: | WaddyThomson [ Sat May 07, 2011 12:32 pm ] |
| Post subject: | Re: Micro Mesh Source |
Not saying what's what, but MicroMesh is also available in sheets, without backing. Two separate kits. Small sheets that come with a sponge and larger sheets similarly. |
|
| Author: | joe white [ Sat May 07, 2011 5:10 pm ] |
| Post subject: | Re: Micro Mesh Source |
Thanks for the leads! Just what I needed!! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Ian Cunningham [ Sat May 07, 2011 8:48 pm ] |
| Post subject: | Re: Micro Mesh Source |
I can't wait to try that stuff out someday. Seems like it would give excellent results. |
|
| Author: | two dogs [ Sun May 08, 2011 2:13 am ] |
| Post subject: | Re: Micro Mesh Source |
international violin... http://www.internationalviolin.com/Sear ... ryCode=134 |
|
| Author: | TonyKarol [ Sun May 08, 2011 9:19 am ] |
| Post subject: | Re: Micro Mesh Source |
Lee Valley sells MM pads and round discs, in individual grits ... search on micro mesh |
|
| Author: | ChuckG [ Mon May 09, 2011 9:10 am ] |
| Post subject: | Re: Micro Mesh Source |
Not sure if these are Micro-Mesh but I use them and like them very much. http://www.stewmac.com/shop/Finishing_supplies/Abrasives,_polishes,_buffers/Micro_Finishing_Papers.html |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|