Official Luthiers Forum!
http://www.luthiersforum.com/forum/

April 30-May 1 Weekend: What Did You Get Done?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=32062		 Page 1 of 2
Author:  amcardon [ Sun May 01, 2011 11:08 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Holy crap, you've been busy! I didn't do much this weekend. I played with my kids most of the day on Saturday (I'm in med school so that's unfortunately not as frequent as I would like) and then worked on my grinder (I am a hobbiest knifemaker as well). Today I went to church and spent the rest of the day with my family (wife and 3 kids ages 3 weeks to 5 years). Nice relaxing weekend!

Oh, and spent way too much time online looking/fantasizing about building guitars!
Author:  Stuart Gort [ Sun May 01, 2011 11:20 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
When uncrating my brand new u.v. cure system from UVCure.com I managed to drop the $250 bulb and it broke on the floor.

They packaged the bulb by simply rolling it up like a cigar in bubble wrap that was the same width as the bulb. The delicate ends were exposed. Then they slid that into a cardboard tube but didn't close off the ends of the tube. I lifted the tube out of the packaging with no reason to think I should hold it level....

....and it slid out of the tube, bounced off my table, and broke as it hit the floor. It was beyond ridiculous. Did I scream profanities? Not saying...but when I described their packaging to Myra at uvcure.com she graciously agreed to send a new bulb. That restored my faith in them. I'm sure their shipping dept. just made a mistake in their packaging procedure.

Other than that....I sanded and prepped four guitars for finishing. As soon as I get the new bulb (shipped out Thursday) I'm going to do bunch of tinting experiments....fun stuff.
Author:  Robbie_McD [ Sun May 01, 2011 11:38 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I built and installed the neck on my latest build:
Attachment:
IMG_3129 (Large).JPG
Author:  douglas ingram [ Sun May 01, 2011 11:48 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Been binding and trimming my latest build.

And to legitimize this being in the luthiers pages, I started routing for the binding on my ellle-zero-zero. Always a stressful operation as so much can go wrong. I'll get some photos of that soon.

I also am dealing with an web host that seems to have left the building unannounced. I managed to get my domain name to point to my blog, which is something at least. I had a sneaking suspicion that this might happen so I'm not too shocked. Still, it sucks.

Other than that, cooking, cleaning, getting after my kids to do their chores...the usual.
Author:  Chris Pile [ Mon May 02, 2011 12:00 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I reglued two loose braces in a client's Takamine flattop, repaired a 2 inch crack in the spruce top, and did a complete fret level. He gigs quite frequently around the area and had a rare weekend off. It was buzzing and making some pretty weird noises when he handed it over, and now it's back to the dulcet tones it's expected to produce. He heads into the studio to work on his 4th CD come Tuesday, so I'll deliver it tomorrow. I can hardly wait to see him smile!
Author:  Tom West [ Mon May 02, 2011 3:51 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Todd: What did you do in your spare time................????
Author:  mqbernardo [ Mon May 02, 2011 5:07 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
impressive... i trimmed and glued 4 fan struts... :roll:
Author:  klooker [ Mon May 02, 2011 7:46 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Cut grass, yardwork, dug out honeysuckle, kids sports, cleaned garage/shop.

Sunday night worked on making my first bridges from scratch.

Kevin Looker
Author:  DannyV [ Mon May 02, 2011 8:29 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Nice stuff! Todd you are a busy guy. The work looks very well done indeed. Your customers are very fortunate.

Got to playing with colours and an air brush. Final coats of nitro on my first burst. Maple / Cedar L-00 I think I like it.
Attachment:
phpu15Tn5PM.jpg


And the flip side.
Attachment:
phpUpfdD9AM.jpg


Plenty of time to let it cure. The 2010 commercial prawn season starts on Thursday. I know exactly what I'll be doing everyday for the next 2 months. Now if I can just find the darn boat!
Attachment:
phpo6UV9jAM.jpg


Have Fun!
Danny

Scarf-o-matic! Good thinking. I may have to borrow that idea.
Author:  Fred Tellier [ Mon May 02, 2011 8:35 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I had a great weekend in the shop, the Cocobolo wedge buffing was completed, the dovetail neck and bridge were glued up. I will do the bridge pin holes and string up later today. I have some pictures but were taken with my Ipod so are not as clear as I would like.

Image

Image

Image

Image

Image

Fred
Author:  Alain Moisan [ Mon May 02, 2011 9:02 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
What did I get done this weekend?

Absolutely nothing! bliss


But now I need to get back to work...
Author:  douglas ingram [ Mon May 02, 2011 9:06 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Todd Stock wrote:

Love the breasthook and the stern sheets details, Douglas. The lack of anything remotely level, square, or plumb raises the larger issue of why we so deeply attracted to eye-sweet curves, breathtaking details, and occasionally...OK, mostly... incomprehensible behavior.

And then there are guitars, boats, and airplanes.


Thanks, Todd, I appreciate that you even know the proper term for the stern sheets! I do try and supply "eye-sweet curves, breathtaking details, and occasionally...OK, mostly... incomprehensible behavior." Especially the incomprehensible behavior.

Filippo, thanks for calling for a steady stream on the boat photos. This one has been a lot of work, from designing and lofting the plans, making the mold, etc, etc. I've been on this since January and I'm not done yet. Buddy wants a sail rig for it, now, too. Looking forward to the simplicity of building guitars.
Author:  munen [ Mon May 02, 2011 10:54 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
i started on my second, a classical again.
glued the laminated neck, and cut some B/S sets from Peteribí (cordia trichotoma)

Attachment:
Imagen 129.jpg

Attachment:
Imagen 131.jpg

Attachment:
Imagen 133.jpg

Attachment:
Imagen 134.jpg

Attachment:
Imagen 138.jpg
Author:  WaddyThomson [ Mon May 02, 2011 10:59 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Filippo, love your sled! I feel one of those coming on. Scarfs are currently more uncomfortable to me than V-Joints.

Dougllas - love your boat! Keep posting those pictures. Good craftsmanship deserves to be seen.

I got diagnosed with Pneumonia, so I have gotten nothing done. I really have a lot to get done though!
Author:  George L [ Mon May 02, 2011 11:19 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Wow, Waddy, get well soon!

You guys all do such fantastic work, it never ceases to amaze and inspire me. I had a busy weekend as well, but did manage to put my new/old drill press to work...

Image

And to wipe a couple of coats of varnish on the L-00 I'm trying to get done -- before I make another mistake!

Image
Author:  Bailey [ Mon May 02, 2011 11:35 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Worked on Greenwood foundation for new house. Treated wood would be good for a direct bury guitar.

Kent
Author:  WudWerkr [ Mon May 02, 2011 11:39 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Spent time and helped family in friends in tn area hard hit with storms ..... I hope all who live there are coping well . It was very very bad , the TV news dosent even come close to showing the Reality .
Author:  ChuckB [ Mon May 02, 2011 11:50 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Got this 0 size florentine cutaway top braced and rough carved. This will be my first attempt at voicing with Chladni patterns. Still have a lot of trimming to do, so now I need to start looking at some patterns.

Chuck
Author:  Tony_in_NYC [ Mon May 02, 2011 12:36 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I decided to pick up a stomach bug before leaving work on Friday so I spent pretty much all of Friday night and Saturday closely studying all of the toilets in my house and a couple of garbage cans as well [xx(] . Felt good enough, well, not good, but I did not feel completely horrible on Sunday and I had promised my older son I would take him to see Lightening McQueen at the NY International Auto Show, so I sucked it up and took the family. I had the foresight (read: inability) to not eat or drink for 24 hours prior, so I did not need to spend any time doing a forensic study of the toilets at the Jacob Javits Convention Center. Which, I am certain, is a good thing. On a positive note, I did find a misplaced bridge pin while crawling around on the floor of my bedroom, so it was not a totally wasted weekend.
Author:  Peter J [ Mon May 02, 2011 1:54 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Just about ready to close the box on a 550 scale flamenco requinto prototype I've been working on for a while now. It's been fun and here are a few photos, one comparing the 550 to my normal 650 Reyes style body.

Attachment:
DSC00099-Medium.jpg

Alaskan Yellow Cedar body

Attachment:
DSC00107-Medium.jpg


Also found a use for all of the wine corks I've been saving for the last ten years. They are intended as Christmas presents for family and friends. I've only got about 5 more to make. All of the corks have been split on the bandsaw... sure makes them much easier to glue to a backing surface... (and please... I'm not really a wino...) laughing6-hehe

Attachment:
Vino- Medium.jpg
Author:  Peter J [ Mon May 02, 2011 2:02 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Fred Tellier wrote:
the Cocobolo wedge buffing was completed


Fred, That is a marvelous, spectacular and also verrrrrrry nice piece of Coco. It blew me away when I saw it. That's just super !! [:Y:] [:Y:]
Author:  James Orr [ Mon May 02, 2011 2:22 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Filippo Morelli wrote:
On my end, not much going on as my parents have been visiting for two weeks. Spring is here so I'm busy relocating the chicken coup, making modifications to now support the ducks we have (!!!)


Are you guys keeping the ducks for eggs? The egg man at our local farmer's market sells duck eggs. I have to admit, I like their avante-garde flair :)
Author:  Dan Pennington [ Mon May 02, 2011 5:05 pm ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I got my McKenzie Machine dialed in and got the plastic pattern making figured out and did my first real inay routing with it on my six string banjitar/guitjo.

Image
Image
Image

The pearl dropped right in and needed no filler.

Image
Author:  MaxBishop [ Tue May 03, 2011 6:51 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
Peter,

Can't wait to get a close up look at your Requinto/Flamenco. Maybe after Mother's day?

Fred,

That coco is to die for! Don't think I've ever seen any better.

Regards,
Max
Author:  Ron M. [ Tue May 03, 2011 9:26 am ]
Post subject:  Re: April 30-May 1 Weekend: What Did You Get Done?
I closed the box on my Honduran Mahogany Weissenborn-Style guitar.

ron
Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/