| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Brass rosette/circle cutter? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=31974 |
Page 1 of 1 |
| Author: | JoeUlman [ Mon Apr 25, 2011 12:25 pm ] |
| Post subject: | Brass rosette/circle cutter? |
Does anyone know who sells a rosette/circle cutter like this one, preferably in the US? Attachment: rosette cutter.JPG Thanks for any help. Joe |
|
| Author: | Darrel Friesen [ Mon Apr 25, 2011 7:11 pm ] |
| Post subject: | Re: Brass rosette/circle cutter? |
LMI makes a nice manual one similar to that, but it's steel, not brass if I recall correctly. http://www.lmii.com/CartTwo/thirdproduc ... cle+Cutter |
|
| Author: | JoeUlman [ Tue Apr 26, 2011 1:14 pm ] |
| Post subject: | Re: Brass rosette/circle cutter? |
Thanks Darrel. LMI’s rosette cutter looks interesting. I was hoping to find one like the one pictured but I may end up just making a simple version out of wood. Joe [update 6/9/11]: Just thought I'd post some pictures of the rosette/circle cutter I finally got around to making: Attachment: IMG_1947 copy.jpg Attachment: IMG_1958 copy.jpg Attachment: IMG_1946 copy.jpg Joe |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|