| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Carbon Fiber Dust http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=31843 |
Page 1 of 1 |
| Author: | Mike Lindstrom [ Thu Apr 14, 2011 12:20 am ] |
| Post subject: | Carbon Fiber Dust |
Yesterday I glued CF rods into a neck. Today I learned that I didn't route quite deep enough. I swear it fit right dry. Anyway, today I was trying to get it leveled out. I know that CF dust is supposed to be pretty bad, and I thought I was doing a good job keeping the dust controlled and collected, but HOLY COW AM I ITCHY!!!!!!!!!!!!!!!!!!!!!!!!!!!! I'm glad have to work this stuff so rarely. Next time, I'll route channels in the underside of the fretboard instead. Mike |
|
| Author: | Howard Klepper [ Thu Apr 14, 2011 12:33 am ] |
| Post subject: | Re: Carbon Fiber Dust |
Do not breathe this stuff. Itching will pass. |
|
| Author: | Mike Lindstrom [ Thu Apr 14, 2011 1:35 am ] |
| Post subject: | Re: Carbon Fiber Dust |
Yeah. I had a mask, ran the DC and the air filter, wiped things down with a wet paper towel. I really thought I was doing a good job containing it. Apparently not. Usually all I do with it is cut it to length, and that I do outside. This was an exception. But I don't think I'll do it again. Why risk it? Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|