Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Almost done - a little more to go...
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=31332		 Page 1 of 1
Author:  John A [ Wed Mar 02, 2011 10:10 am ]
Post subject:  Almost done - a little more to go...
OK - after about a year and a few setbacks (errors :oops: ) I am prepping to begin the finish sanding on my guitar. I stopped all work on it for the past month and a half. I am in the midst of trying to sell my house - so I have been a little distracted. But now that better weather is here I want to sand this guitar outside and finish it up so I can start my second one. My post is just to share my progress and kind of to help motivate myself.

I still have to do the fretting, finish sanding, and glue the bridge. Wish me luck -
Author:  sdsollod [ Wed Mar 02, 2011 10:43 am ]
Post subject:  Re: Almost done - a little more to go...
Lookin' Good!
Author:  DennisK [ Wed Mar 02, 2011 11:46 am ]
Post subject:  Re: Almost done - a little more to go...
Very nice! 'twas not so long ago that I was in that position. Finish sanding out in nice weather is a good time. Took quite a while for me, getting all the rumples out of the sides and refining the neck and heel and headstock shape and rounding over all the bindings. But it's so pretty and the smoothness feels soft to the touch when it's all prepped up for that first wipe of shellac. Honestly it's tempting to keep one "white", just because it feels so nice :) But maybe I'd better do it in dark woods so the absorbed skin oils and dirt aren't so visible...

Are you doing French polish on this one? It's painful by the end, but a lot of fun too... at least if you can get everclear so you can just sit somewhere comfortable and not worry about having super ventilation. Ought to be especially enjoyable if that back/side wood you've got there is as non-porous as its color would suggest.

Don't forget to install the fingerboard side markers before finishing, if you're planning on including them! Unless you already did, but I can't see any in that second picture.
Author:  John A [ Wed Mar 02, 2011 3:05 pm ]
Post subject:  Re: Almost done - a little more to go...
yup - I'll be French polishing with Everclear. the back and sides are maple the top is Lutz with maple bindings
Author:  Mark Mc [ Thu Mar 03, 2011 10:56 am ]
Post subject:  Re: Almost done - a little more to go...
Hey John - that is looking really great. The rosette seems really good from here. Would you care to give us a closer look at that?
Well done!
Mark
Author:  Brian Forbes [ Fri Mar 04, 2011 1:33 am ]
Post subject:  Re: Almost done - a little more to go...
Looks great, but be careful polishing with Everclear...especially if you are going to do a "one for you...one for me" type of job. It's unfortunate that you can't polish a guitar with Guinness. I would love to share a pint with every guitar I finished.
Author:  WaddyThomson [ Fri Mar 04, 2011 11:02 am ]
Post subject:  Re: Almost done - a little more to go...
Looking really good, John. More pictures please!
Author:  John A [ Tue Mar 22, 2011 7:16 pm ]
Post subject:  Re: Almost done - a little more to go...
ok a little more -

So far I think fretting is fun -
Author:  munen [ Tue Mar 22, 2011 7:36 pm ]
Post subject:  Re: Almost done - a little more to go...
i like the rossete.. good luck!
dont rush!! take your time.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/