| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| How would I print this? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=31255 |
Page 1 of 1 |
| Author: | oval soundhole [ Fri Feb 25, 2011 1:14 am ] |
| Post subject: | How would I print this? |
This plan is awesome and I really want to print it out, but I can't figure out how to print it to the correct size I have an Imac and an HP printer, can anyone give me any suggestions? http://www.crane.gr.jp/CRANE_etc/A010_C ... 2_2010.pdf |
|
| Author: | Colin North [ Fri Feb 25, 2011 4:12 am ] |
| Post subject: | Re: How would I print this? |
You could try printing A4 on your own printer and get to your library/local print shop/supermarket, whatever, and enlarge that to A3. Look for a button, or function on the menu "A4 -> A3" rather than enlarging as a percentage. |
|
| Author: | Rob Warren [ Fri Feb 25, 2011 4:17 am ] |
| Post subject: | Re: How would I print this? |
Try this. http://woodgears.ca/bigprint/index.html Save it as a jpeg then use that program to set the dimensions and it'll print on multiple pieces of paper to the correct size. It was in a post here from last week if anyone missed it. Seems like a cool program. Just scaled and printed a body shape I want to play with. Works pretty good. |
|
| Author: | Colin North [ Fri Feb 25, 2011 4:21 am ] |
| Post subject: | Re: How would I print this? |
Rob Warren wrote: Try this. http://woodgears.ca/bigprint/index.html Save it as a jpeg then use that program to set the dimensions and it'll print on multiple pieces of paper to the correct size. It was in a post here from last week if anyone missed it. Seems like a cool program. Just scaled and printed a body shape I want to play with. Works pretty good. Looks like a goood program, but seems to be for windows, not mac. |
|
| Author: | klooker [ Fri Feb 25, 2011 7:32 am ] |
| Post subject: | Re: How would I print this? |
Take it to a blueprint shop. Or worst case a Kinkos type of place which will cost a little more. It should cost less than $2 to print. Kevin Looker |
|
| Author: | Dan Pennington [ Fri Feb 25, 2011 8:34 am ] |
| Post subject: | Re: How would I print this? |
Oval I went through this search for a way to tile print pdf's without having to buy Adobe software a few days ago. I found this online site for free printing: http://www.lucubration.com/open-source- ... inter.html It worked for me. Dan |
|
| Author: | Mike OMelia [ Fri Feb 25, 2011 8:39 am ] |
| Post subject: | Re: How would I print this? |
Thats a VERY interesting Harp Uke. I think I may tuck those plans away for a build. Thanks for pointing them out! I was looking at page 2. Just wondering, how does one position a fret saw to withing a 100th of a mm? Mike |
|
| Author: | Andy Birko [ Fri Feb 25, 2011 12:17 pm ] |
| Post subject: | Re: How would I print this? |
Fret Saw? End Mill. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|