Official Luthiers Forum!
http://www.luthiersforum.com/forum/

First of Three New Builds -- Sapele and Bearclaw Dred
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=31155
Page 1 of 1

Author:  Ken Jones [ Fri Feb 18, 2011 1:47 am ]
Post subject:  First of Three New Builds -- Sapele and Bearclaw Dred

This is #6, and was commissioned by my brother. I believe the back and sides came from The Zootman in last year's swap meet. Some other specs:

sapele neck
flamed maple binding
ebony fingerboard, bridge pins & endpin
cocobolo rosette and headplate
Madagascar rosewood bridge
bone nut & saddle
two-way adjustable truss rod
two carbon fiber reinforcement bars in neck
Gotoh 510 faux-ivory vintage tuners
sitka spruce bracing
maple bridge plate
abalone fingerboard dots
mother-of-pearl headstock inlay
25.4" scale
2 11/16" nut width
14 frets clear of body
dovetail neck joint
Ameritage humidified hardshell case

Here's a link to the album so far. I'll be adding some more detail shots tomorrow.

http://s260.photobucket.com/albums/ii4/skulpter1/Ribbon%20Sapele%20and%20Bearclaw%20Sitka%20Dreadnought/?albumview=slideshow

Here's a brief soundclip of my friend and mentor James Condino noodling around in DADGAD ala Michael Hedges.
http://www.recordingproject.com/bbs/download.php?id=29624&stream=1&passcode=

And a teaser.

Author:  nickton [ Fri Feb 18, 2011 4:27 pm ]
Post subject:  Re: First of Three New Builds -- Sapele and Bearclaw Dred

Very nice.

Author:  J Hewitt [ Fri Feb 18, 2011 4:53 pm ]
Post subject:  Re: First of Three New Builds -- Sapele and Bearclaw Dred

Really nice!!

Author:  Bobc [ Fri Feb 18, 2011 5:49 pm ]
Post subject:  Re: First of Three New Builds -- Sapele and Bearclaw Dred

That looks great Ken.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/