One advantage would be that the back reinforcements strip will not fall on the x.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 3-piece back, anything to watch out for? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=30862 |
Page 1 of 1 |
| Author: | Gtrman13 [ Wed Jan 26, 2011 6:18 pm ] |
| Post subject: | 3-piece back, anything to watch out for? |
I've started a guitar with my first 3-piece back. Is there anything structurally I need to watch out for? The two outer pieces are brazilian cherry and the inner piece is honduras mahogany. I've been curious about using an X-braced back at some point, would there be any benefit to trying this here? |
|
| Author: | Ken Franklin [ Thu Jan 27, 2011 2:22 am ] |
| Post subject: | Re: 3-piece back, anything to watch out for? |
One advantage would be that the back reinforcements strip will not fall on the x.
|
|
| Author: | LanceK [ Thu Jan 27, 2011 10:51 am ] |
| Post subject: | Re: 3-piece back, anything to watch out for? |
I do 4 piece backs and only reinforce the center seam. Some times I wonder why I even do that. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|