| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| 16' braces on a 15' rim http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=30794 |
Page 1 of 1 |
| Author: | sprouseod [ Fri Jan 21, 2011 10:42 am ] |
| Post subject: | 16' braces on a 15' rim |
I have one of the kmg mega molds which i have never used before. It's contouring device is 15' radius. My dish is 16' for the braces. Will it make any difference? Or should I make a 15' radius block for the braces also? Thanks Richard |
|
| Author: | TonyKarol [ Fri Jan 21, 2011 10:45 am ] |
| Post subject: | Re: 16' braces on a 15' rim |
Wont make much if any difference .. carry on. |
|
| Author: | Tom West [ Fri Jan 21, 2011 11:29 am ] |
| Post subject: | Re: 16' braces on a 15' rim |
Richard: Over the width of a back you woul be hard pressed to be able to measure any differance. Your secret is safe here with us....!!! Tom |
|
| Author: | sprouseod [ Fri Jan 21, 2011 11:36 am ] |
| Post subject: | Re: 16' braces on a 15' rim |
That's what I thought Thanks guys Richard |
|
| Author: | bluescreek [ Fri Jan 21, 2011 12:00 pm ] |
| Post subject: | Re: 16' braces on a 15' rim |
nadda zippo should be good to go . |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|