He gives the size right on his website. 0.0245" +/-0.0005" which will really be 0.001 after you've heated it up once
Great blade though.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| fret slotting sawblade size?? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=30343 |
Page 1 of 1 |
| Author: | candothis [ Thu Dec 16, 2010 2:52 pm ] |
| Post subject: | fret slotting sawblade size?? |
does anyone have an idea...or better yet know for sure, what size fret slotting tablesaw blade Shane at High Mountain tonewood was selling awhile back. |
|
| Author: | meddlingfool [ Thu Dec 16, 2010 3:11 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
Just call him up and ask him. He's still a sponsor here and he's quite affable! |
|
| Author: | candothis [ Thu Dec 16, 2010 3:44 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
you're right....he was very helpful...thnx |
|
| Author: | SteveSmith [ Thu Dec 16, 2010 3:47 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
I don't know but I've got one and I like it. |
|
| Author: | Tom West [ Thu Dec 16, 2010 3:50 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
Calipers or micrometer .....Steve..!!! Tom |
|
| Author: | SteveSmith [ Thu Dec 16, 2010 4:18 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
Ha. My arms aren't long enough - I'm about 15 miles from my shop. I think it's a 0.024" but my memory is not to be trusted. |
|
| Author: | Tom West [ Thu Dec 16, 2010 4:48 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
Steve: Sorry about that... I should have know better.. that you would have said if you could. Tom |
|
| Author: | Rod True [ Fri Dec 17, 2010 1:19 pm ] |
| Post subject: | Re: fret slotting sawblade size?? |
He gives the size right on his website. 0.0245" +/-0.0005" which will really be 0.001 after you've heated it up once Great blade though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|